ZyXEL Communications XS3800-28, User Manual, Page: 478 / 789

Chapter 64 DHCP
XS3800-28 User’s Guide
478
64.7 DHCPv4 Server Status
Click NETWORKING > DHCP > DHCPv4 Server in the navigation panel. The DHCP Server Status screen
displays.
Figure 371 NETWORKING > DHCP > DHCPv4 Server > DHCP Server Status
The following table describes the labels in this screen.
64.7.1 DHCPv4 Server Status Details
Click an existing index number of a DHCP server configuration in the NETWORKING > DHCP > DHCPv4
Server > DHCPv4 Server Status screen to display the screen as shown. Use this screen to view details
regarding DHCP server settings configured on the Switch.
Option 82 Profile Select a pre-defined DHCP option 82 profile that the Switch applies to the specified ports in this
VLAN. The Switch adds the Circuit ID sub-option and/or Remote ID sub-option specified in the
profile to DHCP requests that it relays to a DHCP server.
The profile you select here has priority over the one you select in the NETWORKING > DHCP >
DHCPv4 Relay > DHCP Relay VLAN Setting (the DHCP Relay VLAN Setting section)> Add/Edit
screen.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Clear Click Clear to clear the fields to the factory defaults.
Cancel Click Cancel to not save the configuration you make and return to the last screen.
Table 245 NETWORKING > DHCP > DHCPv4 Relay > DHCP Relay VLAN Setting > Add/Edit (Port)
LABEL DESCRIPTION
Table 246 NETWORKING > DHCP > DHCPv4 Server > DHCP Server Status
LABEL DESCRIPTION
Server Status
This section displays configuration settings related to the Switch’s DHCP Server mode.
Index This is the index number. Click an index number to view the server configuration details.
VID This field displays the VLAN ID for which the Switch is a DHCP server.
Server
Status
This field displays the starting DHCP client IP address.
IP Pool
Size
This field displays the number of IP addresses that can be assigned to clients.