ZyXEL Communications XS3800-28, User Manual, Page: 476 / 789

XS3800-28 User’s Guide
476
The following table describes the labels in this screen.
64.6.1 Add/Edit DHCPv4 VLAN Setting
Use this screen to add/edit your DHCP settings based on the VLAN domain of the DHCP clients. Click the
Add/Edit button in the DHCP Relay VLAN Setting section of the NETWORKING > DHCP > DHCPv4 Relay >
DHCP Relay VLAN Setting screen to access this screen.
Note: You must set up a management IP address for each VLAN that you want to configure
DHCP settings for on the Switch.
Figure 369 NETWORKING > DHCP > DHCPv4 Relay > DHCP Relay VLAN Setting > Add/Edit (DHCP Relay
VLAN Setting)
Table 243 NETWORKING > DHCP > DHCPv4 Relay > DHCP Relay VLAN Setting
LABEL DESCRIPTION
DHCP Relay VLAN Setting
VID This field displays the ID number of the VLAN group to which this DHCP settings apply.
Remote
DHCP Server
This displays the IP address of a DHCP server in dotted decimal notation.
Source
Address
This field displays the source IP address you configured for DHCP requests from clients on this
VLAN.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new entry or edit a selected one.
Delete Click Delete to remove the selected entries.
Port
Use this section to apply a different DHCP option 82 profile to certain ports in a VLAN.
Index This field displays a sequential number for each entry. Click an index number to change the
settings.
VID This field displays the VLAN to which the ports belongs.
Port This field displays the ports to which the Switch applies the settings.
Profile Name This field displays the DHCP option 82 profile that the Switch applies to the ports in this VLAN.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new entry or edit a selected one.
Delete Click Delete to remove the selected entries.