ZyXEL Communications XS3800-28, User Manual, Page: 456 / 789

Chapter 60 VLAN Stacking
XS3800-28 User’s Guide
456
60.6.1 Add/Edit Selective Q-in-Q
Click Add/Edit , or select an entry and click Add/Edit in the SWITCHING > VLAN Stacking > Selective QinQ
screen to display this screen.
Figure 352 SWITCHING > VLAN Stacking > Selective QinQ > Add/Edit (Standalone Mode)
Figure 353 SWITCHING > VLAN Stacking > Selective QinQ > Add/Edit (Stacking Mode)
The following table describes the labels in this screen.
Priority This is the service provider’s priority level in the packets.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the table
heading row to select all entries.
Add/Edit Click Add/Edit to add a new entry or edit a selected one.
Delete Click Delete to remove the selected entries.
Table 227 SWITCHING > VLAN Stacking > Selective QinQ (continued)
LABEL DESCRIPTION
Table 228 SWITCHING > VLAN Stacking > Selective QinQ > Add/Edit
LABEL DESCRIPTION
Active Enable the switch button to activate this rule.
Name Enter a descriptive name (up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ]) for
identification purposes.
Port The port number identifies the port you are configuring. In Stacking mode, the first field is the slot ID
and the second field is the port number.
CVID Enter a customer VLAN ID (the inner VLAN tag) from 1 to 4094. This is the VLAN tag carried in the
packets from the subscribers.