ZyXEL Communications XS3800-28, User Manual, Page: 447 / 789

Chapter 59 VLAN Mapping
XS3800-28 User’s Guide
447
Figure 343 SWITCHING > VLAN Mapping > VLAN Mapping Setup
The following table describes the labels in this screen.
59.3.1 Add/Edit VLAN Mapping
Click Add/Edit , or select an entry and click Add/Edit in the SWITCHING > VLAN Mapping > VLAN
Mapping Setup to display this screen. Use this screen to enable and edit the VLAN mapping rules.
Figure 344 SWITCHING > VLAN Mapping > VLAN Mapping Setup > Add/Edit (Standalone Mode)
Table 220 SWITCHING > VLAN Mapping > VLAN Mapping Setup
LABEL DESCRIPTION
Index This is the number of the VLAN mapping entry in the table.
Active This shows whether this entry is activated or not.
Name This is the descriptive name for this rule.
Port This is the port number to which this rule is applied.
In Stacking mode, the first number represents the slot ID and the second is the port number.
VID This is the customer VLAN ID in the incoming packets.
Translated VID This is the VLAN ID that replaces the customer VLAN ID in the tagged packets.
Priority This is the priority level that replaces the customer priority level in the tagged packets.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new entry or edit a selected one.
Delete Click Delete to remove the selected entries.