ZyXEL Communications XS3800-28, User Manual, Page: 431 / 789

Chapter 57 VLAN
XS3800-28 User’s Guide
431
57.11.1.1 Create an IP-based VLAN Example
This example shows you how to create an IP VLAN which includes ports 1, 4 and 8. Follow these steps
using the screen below:
1
Activate this protocol based VLAN.
2
Type the port number you want to include in this protocol based VLAN. Type 1 .
3
Give this protocol-based VLAN a descriptive name. Type IP-VLAN .
4
Select the protocol. Leave the default value IP .
5
Type the VLAN ID of an existing VLAN. In our example we already created a static VLAN with an ID of 5.
Type
5 .
6
Leave the priority set to 0 and click Apply .
Figure 328 Protocol Based VLAN Configuration Example
To add more ports to this protocol based VLAN.
1
Click the index number of the protocol based VLAN entry. Click 1 .
2
Change the value in the Port field to the next port you want to add.
3
Click Apply .
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Clear Click Clear to clear the fields to the factory defaults.
Cancel Click Cancel to not save the configuration you make and return to the last screen.
Table 209 SWITCHING > VLAN > Protocol Based VLAN Setup > Add/Edit (continued)
LABEL DESCRIPTION