ZyXEL Communications XS3800-28, User Manual, Page: 418 / 789

Chapter 57 VLAN
XS3800-28 User’s Guide
418
The following table describes the labels in this screen.
57.4 Private VLAN Status
Use this screen to view all private VLANs created on the Switch. Click SWITCHING > VLAN > VLAN Status >
Private VLAN Status to see the following screen.
Figure 313 SWITCHING > VLAN > VLAN Status > Private VLAN Status
Table 200 SWITCHING > VLAN > VLAN Status > VLAN Status Details
LABEL DESCRIPTION
VID This is the VLAN identification number that was configured in the corresponding VLAN
configuration screen.
Slot ‘Slot’ refers to a Switch in the ‘virtual chassis’ stack. This field displays the slot ID of the stacked
Switch.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
Status This field shows how this VLAN was added to the Switch.
• Dynamic – using GVRP
• Static – manually added as a normal VLAN
• Private – manually added as a private VLAN (primary, isolated or community)
• RMirror – manually added as a remote port mirroring VLAN
• MVR – added through Multicast VLAN Registration (MVR)
Port Number This section displays the ports that are participating in a VLAN. A tagged port is marked as T , an
untagged port is marked as U and ports not participating in a VLAN are marked as “ – “.
Private VLAN Status
This section show private VLAN information for the selected VLAN.
Primary
VLAN
This field shows the primary VLAN ID in the selected VLAN.
Secondary
VLAN
This field shows the secondary VLAN ID in the selected VLAN.
Type This field shows the type of private VLAN: Primary , Community or Isolated .
Port List This shows the ports mapped to the private VLAN using the SWITCHING > Private VLAN or
SWITCHING > VLAN > VLAN Setup > Static VLAN screen.