ZyXEL Communications XS3800-28, User Manual, Page: 348 / 789

Chapter 47 PPPoE
XS3800-28 User’s Guide
348
47.3 PPPoE IA Port
Use this screen to specify whether individual ports are trusted or untrusted ports and have the Switch
add extra information to PPPoE discovery packets from PPPoE clients on a per-port basis.
Note: The Switch will drop all PPPoE packets if you enable the PPPoE Intermediate Agent on
the Switch and there are no trusted ports.
Click the SWITCHING > PPPoE Intermediate Agent > PPPoE IA Port screen to display the screen as shown.
Figure 258 SWITCHING > PPPoE Intermediate Agent > PPPoE IA Port (Standalone Mode)
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 164 SWITCHING > PPPoE Intermediate Agent (continued)
LABEL DESCRIPTION