ZyXEL Communications XS3800-28, User Manual, Page: 167 / 789

Chapter 24 IPv6
XS3800-28 User’s Guide
167
Figure 108 SYSTEM > IPv6 > IPv6 Status > IPv6 Interface Details
The following table describes the labels in this screen.
Table 51 SYSTEM > IPv6 > IPv6 Status > IPv6 Interface Details
LABEL DESCRIPTION
Static IPv6 Active
This field displays whether the IPv6 interface is activated or not.
MTU Size This field displays the Maximum Transmission Unit (MTU) size for IPv6 packets on this interface.
ICMPv6
Rate Limit
Bucket Size
This field displays the maximum number of ICMPv6 error messages which are allowed to transmit
in a given time interval. If the bucket is full, subsequent error messages are suppressed.
ICMPv6
Rate Limit
Error
Interval
This field displays the time period (in milliseconds) during which ICMPv6 error messages of up to
the bucket size can be transmitted. 0 means no limit.
ND DAD
Active
This field displays whether Neighbor Discovery (ND) Duplicate Address Detection (DAD) is
enabled on the interface.
Number of
DAD
Attempts
This field displays the number of consecutive neighbor solicitations the Switch sends for this
interface.
NS-Interval
(millisecon
d)
This field displays the time interval (in milliseconds) at which neighbor solicitations are re-sent for
this interface.
ND
Reachable
Time
(millisecon
d)
This field displays how long (in milliseconds) a neighbor is considered reachable for this interface.
Link-Local
Address
This field displays the Switch’s link-local IP address and prefix generated by the interface. It also
shows whether the IP address is preferred, which means it is a valid address and can be used as a
sender or receiver address.