ZyXEL Communications XS3800-28 User Manual Download Page 166

Page: 166 / 789

Chapter 24 IPv6

XS3800-28 User’s Guide

166

Figure 107

SYSTEM > IPv6 > IPv6 Status

The following table describes the labels in this screen.

24.2.1 IPv6 Interface Status Details

Use this screen to view a specific IPv6 interface status and detailed information. Click an interface index
number in the

SYSTEM

IPv6

IPv6 Status

screen. The following screen opens.

Table 50 SYSTEM > IPv6 > IPv6 Status

LABEL

DESCRIPTION

Domain Name Server

Domain Name
Server

This field displays the IP address of the DNS server.

Source

This field displays whether the DNS server address is configured manually (

Static

) or obtained

automatically using

DHCPv6

IPv6 Table

Index

This field displays the index number of an IPv6 interface. Click on an index number to view more
interface details.

Interface

This is the name of the IPv6 interface you created.

Active

This field displays whether the IPv6 interface is activated or not.

Summary of Contents for XS3800-28






















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for XS3800-28

Reviews:

ZyXEL Communications XS3800-28, User Manual, Page: 166 / 789

Search results

Summary of Contents for XS3800-28

Reviews: