Chapter 46 Configure Clone
XS1930 Series User’s Guide
337
Figure 250
Management > Configure Clone
The following table describes the labels in this screen.
Table 178 Management > Configure Clone
LABEL
DESCRIPTION
Source/
Destination
Port
Enter the destination port or ports under the
Destination
label. These are the ports which are going
to have the same attributes as the source port. You can enter individual ports separated by a
comma or a range of ports by using a hyphen. For example,
2, 4, 6
indicates that ports 2, 4 and 6
are the destination ports.
2-6
indicates that ports 2 through 6 are the destination ports.
*
Select this check box to select all port settings.
Basic Setting
Select which port settings (you configured in the
Basic Setting
menus) should be copied to the
destination port(s).
