Chapter 9 VLAN
XS1920 Series User’s Guide
99
9.5 Configure a Static VLAN
Use this screen to configure a static VLAN for the Switch. Click
Static VLAN
in the
VLAN Status
screen to display the screen as shown next.
Figure 68
Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup
The following table describes the related labels in this screen.
Table 38
Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup
LABEL
DESCRIPTION
ACTIVE
Select this check box to activate the VLAN settings.
Name
Enter a descriptive name for the VLAN group for identification purposes. This name consists
of up to 64 printable characters.
VLAN Group ID
Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
VLAN Type
Select
Normal
(static) or
Private
. For
Private
VLANs, select
Primary
,
Isolated
or
Community
.
Summary of Contents for XS1920 Series
