ZyXEL Communications XS1920 Series, User Manual

Page: 73 / 422

Chapter 8 Basic Setting
XS1920 Series User’s Guide
73
Figure 46
Basic Setting > IP Setup > IP Configuration
The following table describes the labels in this screen.
Table 17
Basic Setting > IP Setup > IP Configuration
LABEL DESCRIPTION
Default Gateway Enter the IP address of the default outgoing gateway in dotted decimal notation.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to reset the fields.
IP Interface
Use these fields to create or edit IP routing domains on the Switch. Each is the IP address of the Switch in an
IP routing domain.
DHCP Client Select this option if you have a DHCP server that can assign the Switch an IP address,
subnet mask, a default gateway IP address and a domain name server IP address
automatically.
Static IP Address Select this option if you don’t have a DHCP server or if you wish to assign static IP
address information to the Switch. You need to fill in the following fields when you
select this option.
IP Address Enter the IP address of your Switch in dotted decimal notation for example
192.168.1.1.
IP Subnet Mask Enter the IP subnet mask of your Switch in dotted decimal notation for example
255.255.255.0.
VID Enter the VLAN identification number to which an IP routing domain belongs.
Add Click Add to insert the entry to the summary table below and save your changes to the
Switch’s run-time memory. The Switch loses these changes if it is turned off or loses
power, so use the
Save link on the top navigation panel to save your changes to the
non-volatile memory when you are done configuring.