ZyXEL Communications XMG3512-B10A User Manual Download Page 218

Page: 218 / 293

XMG3512-B10A User’s Guide

218

HAPTER

System

27.1 Overview

In the

System

screen, you can name your XMG (Host) and give it an associated domain name for

identification purposes.

27.2 The System Screen

Click

Maintenance > System

to open the following screen.

Figure 138

Maintenance > System

The following table describes the labels in this screen.

Table 109 Maintenance > System

LABEL

DESCRIPTION

Host Name

Type a hostname for your XMG.

Enter a descriptive name of up to 16 alphanumeric characters,

not including spaces, underscores, and dashes.

Domain Name

Type a Domain name for your host XMG.

Apply

Click

Apply

to save your changes.

Cancel

Click

Cancel

to abandon this screen without saving.

Summary of Contents for XMG3512-B10A






































































































































































































































































































Search results

Summary of Contents for XMG3512-B10A

Reviews:

Brands by name

Popular brands

ZyXEL Communications XMG3512-B10A, User Manual

Search results

Summary of Contents for XMG3512-B10A

Reviews:

Brands by name

Popular brands