Chapter 79 Networked AV Mode
XGS2220 Series User’s Guide
568
Figure 422
SYSTEM > Logins
Note: The input string in any field of this screen should not contain [ ? ], [ | ], [ ' ], [ " ] or [ , ].
In the
Password
fields, [ space ] is also not allowed.
The following table describes the labels in this screen.
Table 327 SYSTEM > Logins
LABEL
DESCRIPTION
Administrator
This is the default administrator account with the “admin” user name. You cannot change the default administrator
user name.
Old Password
Enter the existing system password (
1234
is the default password when shipped).
New Password
Enter your new system password.
Retype to
confirm
Re-enter your new system password for confirmation.
Edit Logins
You may configure passwords for up to four users. These users can have read-only or read/write access. You can
give users higher privileges through the Web Configurator or the CLI. For more information on assigning privileges
through the CLI see the Ethernet Switch CLI Reference Guide.
Login
This is the index of an user account.
User Name
Set a user name (up to 32 printable ASCII characters
except [ ? ], [ | ], [ ' ], [ " ], or [ , ]).
Password
Enter your new system password.
Retype to
confirm
Retype your new system password for confirmation.
