ZyXEL Communications XGS2220 Series, User Manual

Page: 245 / 655

Chapter 35 Link Layer Discovery Protocol (LLDP)
XGS2220 Series User’s Guide
245
35.10 LLDP-MED Location
Click PORT > LLDP > LLDP MED > LLDP-MED Location to display the screen as shown next.
Figure 176 PORT > LLDP > LLDP MED > LLDP-MED Location
The following table describes the labels in this screen.
35.10.1 Add/Edit LLDP-MED Location
To access this screen, click the Add/Edit button or select an entry from the list and click the Add/Edit
button.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Clear Click Clear to clear the fields to the factory defaults.
Cancel Click Cancel to not save the configuration you make and return to the last screen.
Table 118 PORT > LLDP > LLDP MED > LLDP-MED Network Policy > Add/Edit (continued)
LABEL DESCRIPTION
Table 119 PORT > LLDP > LLDP MED > LLDP-MED Location
LABEL DESCRIPTION
Index This lists the index number of the location configuration. Click an index number to view or edit
the location.
Port This lists the port number of the location configuration.
Location
Coordinates This field displays the location configuration information based on geographical coordinates
that includes longitude, latitude, altitude and datum.
Civic Address This field displays the Civic Address for the remote device using information such as Country,
State, County, City, Street, Number, ZIP code and additional information.
ELIN Number This field shows the Emergency Location Identification Number (ELIN), which is used to
identify endpoint devices when they issue emergency call services. The valid length is form
10 to 25 characters.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new location or edit a selected one.
Delete Select the locations that you want to remove, then click Delete .