Chapter 34 Link Aggregation
XGS2220 Series User’s Guide
221
34.3 Link Aggregation Setting
Click
PORT
>
Link Aggregation
>
Link Aggregation Setting
to display the screen shown next. See
for more information on link aggregation.
Figure 158
PORT > Link Aggregation > Link Aggregation Setting
The following table describes the labels in this screen.
Table 105 PORT > Link Aggregation > Link Aggregation Setting
LABEL
DESCRIPTION
This is the only screen you need to configure to enable static link aggregation.
Group ID
The field identifies the link aggregation group, that is, one logical link containing multiple ports.
Active
Select this to activate a trunk group.
