Chapter 36 Access Control
XGS1930 Series User’s Guide
294
36.4 Logins
Up to five people (one administrator and four non-administrators) may access the Switch via web
configurator at any one time.
• An administrator is someone who can both view and configure Switch changes. The username for the
Administrator is always
admin
. The default administrator password is
1234
.
Note: It is highly recommended that you change the default administrator password (
1234
).
• A non-administrator (username is something other than
admin
) is someone who can view but not
configure Switch settings.
Click
Management > Access Control > Logins
to view the screen as shown.
Figure 211
Management > Access Control > Logins
The following table describes the labels in this screen.
Table 151 Management > Access Control > Logins
LABEL
DESCRIPTION
Administrator
This is the default administrator account with the “admin” user name. You cannot change the default
administrator user name. Only the administrator has read/write access.
Old Password
Type the existing system password (
1234
is the default password when shipped).
New Password
Enter your new system password.
Retype to
confirm
Retype your new system password for confirmation.
Edit Logins
You may configure passwords for up to four users. These users have read-only access.
User Name
Set a user name (up to 32 ASCII characters
long).
