Chapter 4 Web Configurator
XGS1930 Series User’s Guide
50
Figure 36
Wizard > Basic > Step 2 Password
Each field is described in the following table.
Table 9 Wizard > Basic > Step 2 Password
LABEL
DESCRIPTION
Administrator's Password
Current password
Type the existing system password (1234 is the default password when shipped).
New password
Enter your new system password. Up to 32 characters are allowed for the new password
except [ ? ], [ | ], [ ' ], [ " ], [ space ], or [ , ].
Confirm password
Retype your new system password for confirmation.
SNMP
SNMP
Select
Enabled
to let the Switch act as an SNMP agent, which allows a manager station to
manage and monitor the Switch through the network. Select
Disabled
to turn this feature
off.
Version
Select the SNMP version for the Switch. The SNMP version on the Switch must match the
version on the SNMP manager. Choose SNMP version 2c (
v2c
), SNMP version 3 (
v3
) or both
(
v3v2c
).
Note: SNMP version 2c is backwards compatible with SNMP version 1.
Get Community
Enter the
Get Community
string, which is the password for the incoming Get- and
GetNextrequests from the management station.
The
Get Community
string is only used by SNMP managers using SNMP version 2c or lower.
Set Community
Enter the
Set Community
string, which is the password for the incoming Set- requests from
the management station.
The
Set Community
string is only used by SNMP managers using SNMP version 2c or lower.
Summary of Contents for XGS1930-28HP
Page 19: ...19 PART I User s Guide...
Page 39: ...39 PART II Technical Reference...
