ZyXEL Communications XGS-4528F, User Manual, Page: 412 / 491

Chapter 46 Access Control
XGS-4526/4528F/4728F User’s Guide
412
46.4 Setting Up Login Accounts
Up to five people (one administrator and four non-administrators) may access the
Switch via web configurator at any one time.
• An administrator is someone who can both view and configure Switch changes.
The username for the Administrator is always admin. The default administrator
password is 1234.
Note: It is highly recommended that you change the default administrator password
( 1234 ).
• A non-administrator (username is something other than admin) is someone
who can view but not configure Switch settings.
Click Management > Access Control > Logins to view the screen as shown.
Figure 221 Management > Access Control > Logins
The following table describes the labels in this screen.
Table 154 Management > Access Control > Logins
LABEL DESCRIPTION
Administrator
This is the default administrator account with the “admin” user name. You cannot change
the default administrator user name. Only the administrator has read/write access.
Old Password Type the existing system password (1234 is the default password
when shipped).
New Password Enter your new system password.
Retype to
confirm
Retype your new system password for confirmation