ZyXEL Communications XGS-4528F, User Manual, Page: 384 / 491

Chapter 43 ARP Learning
XGS-4526/4528F/4728F User’s Guide
384
43.2 Configuring ARP Learning
Click IP Application > ARP Learning in the navigation panel to display the
screen as shown next.
Figure 208 IP Application > ARP Learning
The following table describes the labels in this screen.
Table 139 IP Application > ARP Learning
LABEL DESCRIPTION
Port This field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports.
Use this row first to set the common settings and then make adjustments
on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
ARP
Learning
Mode Select the ARP learning mode the Switch uses on the port.
Select ARP-Reply to have the Switch update the ARP table only with the
ARP replies to the ARP requests sent by the Switch.
Select Gratuitous-ARP to have the Switch update its ARP table with either
an ARP reply or a gratuitous ARP request.
Select ARP-Request to have the Switch update the ARP table with both
ARP replies, gratuitous ARP requests and ARP requests.