ZyXEL Communications X2002, User Manual, Page: 384 / 562

Chapter 26 System Log
X2002 User’s Guide
384
26.2.1 Filter Log Results Screen
Use this screen to filter the logs you want to view. Click the Show Filter button in
the View Log screen to bring up the log filter.
Figure 231 System Log > View Log: Show Filter
Each field is described in the following table.
Source This field lists the source IP address of the incoming packet. Click the
column header to sort search results by
Source .
Destination This field lists the destination IP address of the incoming packet. This is
typically the LAN or WAN IP address of the X2002. Click the column
header to sort search results by
Destination .
Note This field displays additional information about the log entry. Click the
column header to sort search results by
Note .
Table 150 System Log > View Log (continued)
LABEL DESCRIPTION
Table 151 System Log > View Log: Show Filter
LABEL DESCRIPTION
Display Select a category of logs to view; select All Logs to view logs from all
of the log categories that you selected in the Log Setting page. Refer
to Section 26.1 on page 381 for more information on log categories.
Keyword You can filter the logs to only display log entries that match a string you
enter in this field. A string can be a word, a number or a combination of
words and numbers. Type the string you want to search the logs for.
Priority Select a log priority with which to filter your query results. Only logs
matching the selected priority are shown.
Priorities are described in Log Severity on page 382 .
Source Address You can filter the logs to only display log entries that are created as a
result of some action originating at a particular IP address. For
example, an administrator logging into the X2002 from a computer with
a particular IP address on your network. Type the IP address you want
to search for as the source IP address of the X2002.
Destination
Address You can filter the logs to only display log entries that are created as a
result of some action terminating at a particular IP address. This is
typically the X2002s LAN or WAN IP address. Type the IP address you
want to search for as the destination IP address of the X2002.
Search Click Search to show the filtered results of your logs. Only the logs that
match the criteria you specified are displayed.