ZyXEL Communications X2002, User Manual

Page: 322 / 562

Chapter 21 Group Management
X2002 User’s Guide
322
21.2.2 Edit Group Management Associations
Use this screen to configure links from an authority group or an outbound line
group to authority groups, LCRs or ring groups configured on the X2002. To access
this screen, click the
Advanced icon next to the group you want to configure in
the Configuration > PBX > Group Management screen.
Figure 192 Advanced > (Group Type) > (Group Name)
Each field is described in the following table.
Table 113 Advanced > (Group Type) > (Group Name)
LABEL DESCRIPTION
Accessible
Group List The table below shows which links you can create from the group
(authority group or outbound line group) identified in the
Group Name
field above the table.
Group Name This field displays the name of an authority group, LCR or ring group to
which you can configure a link.
Description This field displays the description of the group to which you can create a
link.
Group Type This field identifies whether you are creating a link to:
Authority Group - another set of extensions on the X2002.
LCR - an outbound dialing rule containing outbound line groups.
Associations Select this checkbox to link a group you are configuring to another
group.
Clear this checkbox to remove a link between the group you are
configuring and another group.
Apply Click this to save your changes.
Cancel Click this to go back to the previous screen.