ZyXEL Communications WX3401-BO, User Manual

Page: 80 / 180

Chapter 5 Connection Status
WX3401-B0 User’s Guide
80
Each field is described in the following table.
5.4 LAN Settings
Use this screen to view the LAN IP address and subnet mask of your WX3401-B0.
Figure 34 LAN
Click the Arrow icon ( ) to open the following screen. Use this screen to configure the LAN IP address
and subnet mask for your WX3401-B0.
Table 9 WiFi Settings: Configuration
LABEL DESCRIPTION
WiFi
2.4G/5G WiFi
Click this switch to enable or disable the 2.4G and/or 5G wireless networks. When the switch
goes to the right
, the function is enabled. Otherwise, it is not.
WiFi Name The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for WiFi.
WiFi Password If you selected Random Password , this field displays a pre-shared key generated by the
WX3401-B0.
If you did not select Random Password , you can manually type a pre-shared key from 8 to 64
case-sensitive keyboard characters.
Click the Eye icon to show or hide the password of your wireless network. When the Eye icon
is slashed
, you’ll see the password in plain text. Otherwise, it is hidden.
Random Password Select this option to have the WX3401-B0 automatically generate a password. The WiFi
Password field will not be configurable when you select this option.
Hide WiFi Name Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Note: Disable WPS in the Network Setting > Wireless > WPS screen to hide the SSID.
Save Click Save to save your changes.