manualshive.com logo in svg

ZyXEL Communications WX3310-B0, User Manual, Page: 16 / 118

Share
Download
ZyXEL Communications WX3310-B0 User Manual Download Page 16

WX3310-B0 User’s Guide

16

C

HAPTER

  2

The Web Configurator

2.1  Overview

This chapter describes how to access the

 

WX3310 Web Configurator and provides an overview of its 

screens.

The Web Configurator is an HTML-based management interface that allows easy setup and 
management of the WX3310 via Internet browser. 

Use

:

• Internet Explorer 11 and later version
• Mozilla Firefox 67.0.2 and later version
• Google Chrome 77 and later version 
• Safari 5.0 and later version 

The recommended screen resolution is 1024 by 768 pixels.

In order to use the Web Configurator you need to allow:

• Web browser pop-up windows from your device.
• JavaScript (enabled by default).
• Java permissions (enabled by default).

Refer to 

Chapter 14 on page 87

 to see how to make sure these functions are allowed in Internet 

Explorer.

2.1.1  What You Can Do in this Chapter

• To change your computer’s IP address in Windows 7 operating system, see 

Section 2.3.1 on page 19

.

• To change your computer’s IP address in MAC OS X 10.11 operating system, see 

Section 2.3.2 on 

page 21

.

2.2  Accessing the Web Configurator

1

Make sure your WX3310 hardware is properly connected and prepare your computer or computer 
network to connect to the WX3310 (refer to the Quick Start Guide).

2

Launch your web browser.

Summary of Contents for WX3310-B0























































































































Reviews:

No comments