Chapter 9 Wireless LAN
WRE6505 User’s Guide
61
Note: After you click
Push Button
on this screen, you have to press a similar button in
the wireless station utility within 2 minutes. To add the second wireless station, you
have to press these buttons on both device and the wireless station again after the
first 2 minutes.
Figure 50
Network > Wireless LAN (2.4/5G) > WPS Station
The following table describes the labels in this screen.
9.11 Scheduling Screen
Use this screen (available in AP mode only) to set the times your wireless LAN is turned on and off.
Wireless LAN scheduling is disabled by default. The wireless LAN can be scheduled to turn on or off
on certain days and at certain times. To open this screen, click
Network
>
Wireless LAN (2.4/
5G)
>
Scheduling
tab.
Table 27
Network > Wireless LAN (2.4/5G)> WPS Station
LABEL
DESCRIPTION
Push Button
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless stations’s wireless settings. See
Click this to start WPS-aware wireless station scanning and the wireless security
information synchronization.
Or input station’s
PIN number
Use this button when you use the PIN Configuration method to configure wireless station’s
wireless settings. See
Type the same PIN number generated in the wireless station’s utility. Then click
Start
to
associate to each other and perform the wireless security information synchronization.
