Chapter 12 Maintenance
WRE6505 v2 User’s Guide
71
The following table describes the labels in this menu.
12.4 System Password Screen
Use this screen to set the web configurator password. Click
Maintenance
>
System
. The following
screen displays.
Figure 46
Maintenance > Password
The following table describes the labels in this screen.
12.5 Time Screen
Use this screen to configure the WRE6505 v2’s time based on your local time zone. To change your
WRE6505 v2’s time and date, click
Maintenance
>
Time
. The screen appears as shown.
Table 28
Maintenance > General
LABEL
DESCRIPTION
System Name
Enter a descriptive name to identify the WRE6505 v2 in an Ethernet network.
Domain Name
This is the domain name of the WRE6505 v2.
Administrator
Inactivity
Timer
Type how many minutes a management session can be left idle before the session times out.
After it times out you have to log in with your password again. Very long idle timeouts may
have security risks. A value of "0" means a management session never times out, no matter
how long it has been left idle (not recommended).
Apply
Click
Apply
to save your changes back to the WRE6505 v2.
Reset
Click
Reset
to reload the previous configuration for this screen.
Table 29
Maintenance > System > Password
LABEL
DESCRIPTION
Old Password
Type the default password or the existing password you use to access the system in this
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm
Type the new password again in this field.
Apply
Click
Apply
to save your changes back to the WRE6505 v2.
Reset
Click
Reset
to reload the previous configuration for this screen.
