Chapter 7 Tutorials
WRE6505 v2 User’s Guide
40
Figure 18
Example WPS Process: PBC Method
7.3.2 PIN Configuration
When you use the PIN configuration method, you need to use both WRE6505 v2’s configuration
interface and the client’s utilities.
The push button configuration function is only available in AP mode.
1
Launch your wireless client’s configuration utility. Go to the WPS Station settings and select the PIN
method to get a PIN number.
2
On the WRE6505 v2, navigate to the
Network
>
Wireless LAN 2.4G
or
Wireless LAN 5G
>
WPS
screen.
3
Obtain the PIN number for the WRE6505 v2 or press the
Generate
button to create a new PIN
number. See
4
Enter the WRE6505 v2 PIN number in the wireless station’s utility screen.
The WRE6505 v2 authenticates the wireless client and sends the proper configuration settings to
the wireless client. This may take up to two minutes. Then the wireless client is able to
communicate with the WRE6505 v2 securely.
Wireless Client
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
AP
