WRE6505 v2 User’s Guide
27
C
H A P T E R
5
Access Point Mode
5.1 Overview
In Access Point (AP) mode your WRE6505 v2 bridges a wired network (LAN) and wireless LAN
(WLAN) in the same subnet. See the figure below for an example.
Figure 14
Wireless Internet Access in Access Point Mode
Note: See
for an example of setting up a wireless network in
Access Point mode.
5.2 What You Can Do
• Use the
Status
) to view read-only information about your
WRE6505 v2.
• Use the
LAN
) to set the IP address for your WRE6505 v2 acting
as an access point.
• Use the
Wireless LAN
) to configure the wireless settings and
wireless security between the wireless clients and the WRE6505 v2.
