ZyXEL Communications WRE 2205, User Manual, Page: 19 / 74

Chapter 3 Connection Wizard
WRE2205 User’s Guide
19
3.3.2 Manually Configuring AP Parameters
If the AP you want to connect to is not listed, then follow these steps to configure the security
settings of the AP manually.
1
Select Setup repeater manually .
2
Type the SSID of the AP into the SSID field.
Figure 7
Wizard Step 2: Typing the SSID
3
Configure the security settings. The number of characters accepted by the KEY field is shown in the
following table.
Table 6 Maximum Key Lengths
ENCRYPTION KEY FORMAT KEY LENGTH
64-bit WEP ASCII 5 characters
Hex 10 characters
128-bit WEP ASCII 13 characters
Hex 26 characters
WPA pre-shared key Passphrase 8-63 characters
Hex 64 characters