ZyXEL Communications WRE 2205, User Manual, Page: 14 / 74

Chapter 2 The Web Configurator
WRE2205 User’s Guide
14
4
Type admin (default) as the user name and 1234 (default) as the password and click OK .
Figure 3
Login Screen
2.3 Resetting the WRE2205
If you forget your password or IP address, or you cannot access the Web Configurator, press the
WPS button for more than 10 seconds to reload the factory-default configuration file. This means
that you will lose all configurations that you had previously saved, the username will be reset to
admin and password will be reset to 1234 . The IP address will be reset to “192.168.1.2”.
1
Make sure the power LED is on.
2
Press and hold the WPS button. After 10 seconds, the power LED begins flashing.
3
Release the WPS button. The WRE2205 reloads factory defaults and begins to reboot.