WAP6906 User’s Guide
56
The following table describes the general wireless LAN labels in this screen.
9.4 AP List Screen
You can use this screen to select an AP and enter its WiFi password to connect the wireless network.
After connecting to an AP its SSID is automatically displayed in the
Station
screen.
Click
Networking > AP Connection > AP List
. The screen appears as shown.
Figure 30
Networking > AP Connection > AP List
Table 19 Networking > AP Connection > Station
LABEL
DESCRIPTION
Network
Name(SSID)
Enter the name of the wireless network to which the WAP6906 is connecting
Connection
Status
This shows whether the WAP6906 is already connected, attempting to connect, or not
connected to a wireless network.
Encryption
Select the data encryption method the wireless network uses.
Pre-Shared Key
Enter the password that the WAP6906 uses to connect to the wireless network.
Apply
Click
Apply
to save your changes back to the WAP6906.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
