ZyXEL Communications WAP6906 User Manual Download Page 41

Page: 41 / 99

Chapter 6 Monitor

WAP6906 User’s Guide

6.5 MBSS Monitor

Go to

Monitor > MBSS Monitor

. A Multiple Basic Server Set (MBSS) allows you to use your WAP6906 to

provide several Basic Server Sets (BSS) simultaneously. This screen shows a summary of the BSS
configured in your WAP6906.

Packets Transmitted
Successfully

This shows the number of packets that have been successfully transmitted by the WAP6906.

Bytes Transmitted

This shows the number of bytes that have been transmitted by the WAP6906.

Association Table

The table displays after you click the

Association Table

button.

Access Point

This shows the MAC address of the AP to which the WAP6906 is connected.

Wi-Fi Client

This shows the MAC address of the wireless client which is associated with the WAP6906.

VAP

This shows the SSID name of the wireless network to which the WAP6906 is connecting.

RSSI (dbm)

This shows the RSSI (Received Signal Strength Indicator) of the WAP6906’s wireless
connection.

TX PHY Data Rate
(Mbps)

This shows the current data rate of the connected AP or client.

SNR

This Signal-to-Noise Ratio (SNR) is the ratio between the received signal power and the
received noise power.

Rx Bytes

This shows the number of bytes that have been received by the connected AP or client.

Tx Bytes

This shows the number of bytes that have been transmitted by the connected AP or client.

This shows the wireless bandwidth allowed for the connected wireless clients.

Time Associated

This shows the total amount of time (in seconds) the WAP6906 has been associated with the
AP or client.

Refresh

Click the

Refresh

button to refresh the WAP6906 settings.

Table 9 Monitor > Wireless Monitor

LABEL

DESCRIPTION

Summary of Contents for WAP6906




































































































Search results

Summary of Contents for WAP6906

Reviews:

Related manuals for WAP6906

Brands by name

Popular brands

ZyXEL Communications WAP6906, User Manual

Search results

Summary of Contents for WAP6906

Reviews:

Related manuals for WAP6906

Brands by name

Popular brands