Chapter 2 The Web Configurator
WAP6906 User’s Guide
19
Note: After you have configured your WAP6906, you must remember to change your static IP
back to automatic to be able to access the Internet. If you want to change the IP
address to automatic (default) then repeat steps 1 to 4, for step 5 select the
Obtain an
IP address automatically
radio button, and click
OK
.
2.4.2 Static IP Configuration in MAC OS X
Follow these steps to change your computer’s IP address in MAC OS X 10.11 operating system.
1
Open your
System Preferences
, then click on
Network
.
2
Once the
Network
screen is open, it is recommended you click on
Location
>
Edit Locations
to create a
new profile. Use the
+
button to add a new profile, in this case it is called
Static IP
. This will easily help you
change from static IP address to automatic.
