ZyXEL Communications WAP5705, User Manual

Page: 96 / 156

Chapter 11 Maintenance
WAP5705 User’s Guide
96
The WAP5705 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 65
Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the
Firmware Upgrade screen.
11.7 Configuration Backup/Restore Screen
Backup configuration allows you to back up (save) the WAP5705’s current configuration to a file on
your computer. Once your WAP5705 is configured and functioning properly, it is highly
recommended that you back up your configuration file before making configuration changes. The
backup configuration file will be useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your WAP5705.
Click Maintenance > Backup/Restore . Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
Figure 66
Maintenance > Backup/Restore