ZyXEL Communications WAP5705, User Manual

Page: 83 / 156

Chapter 9 Wireless LAN
WAP5705 User’s Guide
83
The following table describes the labels in this screen.
9.9 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click
Network > Wireless LAN > WPS tab.
Note: With WPS, wireless clients can only connect to the wireless network using the first
SSID on the WAP5705.
Figure 54
Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 34
Network > Wireless LAN > QoS
LABEL DESCRIPTION
Enable WMM QoS Check this to have the WAP5705 automatically give a service a priority level according
to the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia
Quality of Service) gives high priority to voice and video, which makes them run more
smoothly.
Apply Click Apply to save your changes to the WAP5705.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 35
Network > Wireless LAN > WPS
LABEL DESCRIPTION
WPS Setup
Enable WPS Select this to enable the WPS feature.
PIN Number This displays a PIN number last time system generated. Click Generate to generate a
new PIN number.
Status