ZyXEL Communications WAP5705, User Manual

Page: 81 / 156

Chapter 9 Wireless LAN
WAP5705 User’s Guide
81
9.7 Wireless LAN Advanced Screen
Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
and high-throughput physical mode settings.
Click Network > Wireless LAN > Advanced . The screen appears as shown.
Figure 52
Network > Wireless LAN > Advanced
The following table describes the labels in this screen.
Add a station
Mac Address Enter the MAC addresses of the wireless station that are allowed or denied access to the
WAP5705 in these address fields. Enter the MAC addresses in a valid MAC address format, that
is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
MAC Filter Summary
Delete Click the delete icon to remove the MAC address from the list.
MAC Address This is the MAC address of the wireless station that are allowed or denied access to the
WAP5705.
Apply Click Apply to save your changes back to the WAP5705.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 32
Network > Wireless LAN > MAC Filter
LABEL DESCRIPTION
Table 33
Network > Wireless LAN > Advanced
LABEL DESCRIPTION
RTS/CTS
Threshold Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS
(Clear To Send) handshake.
Enter a value between 256 and 2346 .
Fragmentation
Threshold The threshold (number of bytes) for the fragmentation boundary for directed messages. It is
the maximum data fragment size that can be sent. Enter an even number between
256 and
2346 .