ZyXEL Communications WAP5705, User Manual

Page: 57 / 156

Chapter 7 Tutorials
WAP5705 User’s Guide
57
7.4 Enabling and Configuring Wireless Security (No WPS)
This example shows you how to configure wireless security settings with the following parameters
on your WAP5705.
Follow the steps below to configure the wireless settings on your WAP5705.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
Section 6.2 on page 47 ).
1
Open the Wireless LAN > General screen in the AP’s Web Configurator.
2
Enter SSID_Example3 as the SSID and select a channel or select Auto Channel Selection to
have the WAP5705 scans for and select an available channel automatically. Click Apply .
Figure 39
Tutorial: Network > Wireless LAN > General
3
Click the Security tab.
SSID SSID_Example3
Channel Auto
Security WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)