ZyXEL Communications WAP5705, User Manual

Page: 39 / 156

Chapter 5 Client Mode
WAP5705 User’s Guide
39
5.6.1 Adding a New WLAN Profile
Use this screen to create a new wireless LAN profile for your WAP5705. Click the Add button in the
Configuration > Network > Wireless LAN > Profile screen to open the following screen.
Figure 24
Client Mode: WLAN > Profile > Add
The following table describes the labels in this screen.
Add Click this button to create a new profile.
Delete Select a profile and click this button to remove it.
Edit Select a profile and click this button to modify it.
Activate Select a profile and click this button to enable it.
Note: You can activate only one profile at a time.
Table 12
Client Mode: WLAN > Profile (continued)
LABEL DESCRIPTION
Table 13
Client Mode: WLAN > Profile > Add
LABEL DESCRIPTION
Wireless Setup
Profile Name Enter a descriptive name for this profile.
Network Name
(SSID) Enter the name of the access point to which you are connecting.
Site Survey Click this button to go to the Site Survey screen and see available wireless devices
within range.
Security
Security Mode Select the security mode of the access point to which you want to connect.
Apply Click Apply to save your changes back to the WAP5705.
Back Click Back to go back to the previous screen.