ZyXEL Communications WAP5705, User Manual

Page: 33 / 156

Chapter 4 Access Point Mode
WAP5705 User’s Guide
33
4.4.1 Navigation Panel
Use the menu in the navigation panel to configure WAP5705 features in Access Point mode.
The following screen and table show the features you can configure in Access Point mode.
Figure 20
Menu: Access Point Mode
The following table describes the sub-menus.
CPU Usage This displays what percentage of the WAP5705’s processing ability is currently used. When
this percentage is close to 100%, the WAP5705 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.
Memory Usage This shows what percentage of the heap memory the WAP5705 is using.
System Setting
Configuration Mode This shows the web configurator mode you are viewing - Expert .
Summary
Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen ( Section 8.5 on page 71 ).
Use this screen to view port status and packet specific statistics.
WLAN Station Status Click Details... to go to the Monitor > WLAN Station Status screen ( Section 8.6 on page
72 ). Use this screen to view the wireless stations that are currently associated to the
WAP5705.
Table 9
Status Screen: Access Point Mode
LABEL DESCRIPTION
Table 10
Navigation Panel: Access Point Mode
LINK TAB FUNCTION
Status This screen shows the WAP5705’s general device, system and interface
status information. Use this screen to access the summary statistics tables.
MONITOR
Log View Log Use this screen to view the list of activities recorded by your WAP5705 and
change your log settings.
Log Settings
Packet Statistics Use this screen to view port status and packet specific statistics.
WLAN Station
Status Use this screen to view the wireless stations that are currently associated
to the WAP5705.
CONFIGURATION
Network