ZyXEL Communications wap3205 V3, User Manual

Page: 66 / 165

Chapter 6 Wireless LAN
WAP3205 v3 User’s Guide
66
6.11 WLAN Information Screen
Use this screen to view the SSID and security of the selected AP wireless network when the WAP3205 v3 is
in client bridge mode. To open this screen, click
Network > AP Select > WLAN Info tab.
Figure 47 Network > AP Select > WLAN Information
The following table describes the labels in this screen.
Select Use the radio button to select the wireless device to which you want to connect.
SSID This displays the Service Set IDentity of the wireless device. The SSID is a unique name that
identifies a wireless network. All devices in a wireless network must use the same SSID.
MAC This displays the MAC address of the wireless device.
Channel This displays the channel number used by this wireless device.
Mode This displays which IEEE 802.11b/g/n wireless networking standards the wireless device
supports.
Security Mode This displays the type of security configured on the wireless device. OPEN means no security is
configured and you can connect to it without a password.
Strength This displays the strength of the wireless signal. The signal strength mainly depends on the
antenna output power and the distance between your WAP3205 v3 and this device.
Refresh Click this button to search for available wireless devices within transmission range and update
this table.
Connect Click this button to associate to the selected wireless device.
Table 28 Network > Wireless LAN > AP Select (continued)
LABEL DESCRIPTION
Table 29 Network > AP Select > WLAN Information
LABEL DESCRIPTION
SSID This displays the Service Set IDentity of the AP to which the WAP3205 v3 is connecting.
Security Mode This displays the type of security configured on the AP to which the WAP3205 v3 is connecting.