Chapter 8 Tutorials
WAP3205 v2 User’s Guide
61
Figure 51
Link Status
If your connection is successful, open your Internet browser and enter
http://www.zyxel.com
or the
URL of any other web site in the address bar. If you are able to access the web site, your wireless
connection is successfully configured.
8.5 Using Multiple SSIDs on the WAP3205 v2
You can configure more than one SSID on a WAP3205 v2 when it is operating in access point or
universal repeater mode. This allows you to configure multiple independent wireless networks on
the WAP3205 v2 as if there were multiple APs (virtual APs). Each virtual AP has its own SSID,
wireless security type and MAC filtering settings. That is, each SSID on the WAP3205 v2 represents
a different access point/wireless network to wireless clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients
using different SSIDs can access the Internet and the wired network behind the WAP3205 v2 (such
as a printer), but they cannot listen to each other’s traffic.
