WAP3205 v2 User’s Guide
15
C
H A P T E R
3
Access Point Mode
3.1 Overview
The WAP3205 v2 is set to access point mode by default. In this mode your WAP3205 v2 bridges a
wired network (LAN) and wireless LAN (WLAN) in the same subnet. See the figure below for an
example.
Figure 6
Wireless Internet Access in Access Point Mode
Note: See
for an example of setting up a wireless network in
Access Point mode.
3.2 What You Can Do
• Use the
Status
) to view read-only information about your
WAP3205 v2.
• Use the
LAN
) to set the IP address for your WAP3205 v2 acting
as an access point.
• Use the
Wireless LAN
screens (
) to configure the wireless settings and
wireless security between the wireless clients and the WAP3205 v2.
