manualshive.com logo in svg

ZyXEL Communications WAP3205 v2, User Manual

Share
Download
ZyXEL Communications WAP3205 v2 User Manual Download Page 11

 Chapter 1 Getting to Know Your WAP3205 v2

WAP3205 v2 User’s Guide

11

1.7  LEDs

Figure 2   

Front Panel

The following table describes the LEDs and the WPS button.

Table 1   

Front Panel LEDs and WPS Button

LED

COLOR

STATUS

DESCRIPTION

Power

Green

On

The WAP3205 v2 is receiving power and starts up.

Blinking

The WAP3205 v2 is in the process of default restoring.

Off

The WAP3205 v2 is not receiving power.

LAN 1-2

Green

On

The WAP3205 v2 has a successful 10/100MB Ethernet 
connection. 

Blinking

The WAP3205 v2 is sending/receiving data through the LAN.

Off

The LAN is not connected.

WLAN

Green

On

The WAP3205 v2 is ready, but is not sending/receiving data 
through the wireless LAN. 

Blinking

The WAP3205 v2 is sending/receiving data through the wireless 
LAN.

Off

The wireless LAN is not ready or has failed.

Summary of Contents for WAP3205 v2































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands