manualshive.com logo in svg

ZyXEL Communications WAP3205 v2, User Manual

Share
Download
ZyXEL Communications WAP3205 v2 User Manual Download Page 104

Chapter 12 Maintenance

WAP3205 v2 User’s Guide

104

After two minutes, log in again and check your new firmware version in the 

Status

 screen.

If the upload was not successful, an error message appears. Click 

Return

 to go back to the 

Firmware Upgrade

 screen.

12.7  Configuration Backup/Restore Screen

Backup configuration allows you to back up (save) the WAP3205 v2’s current configuration to a file 
on your computer. Once your WAP3205 v2 is configured and functioning properly, it is highly 
recommended that you back up your configuration file before making configuration changes. The 
backup configuration file will be useful in case you need to return to your previous settings. 

Restore configuration allows you to upload a new or previously saved configuration file from your 
computer to your WAP3205 v2.

Click 

Maintenance > Backup/Restore

. Information related to factory defaults, backup 

configuration, and restoring configuration appears as shown next.

Figure 79   

Maintenance > Backup/Restore 

The following table describes the labels in this screen.

Table 50   

Maintenance > Backup/Restore

LABEL

DESCRIPTION

Backup

Click 

Backup

 to save the WAP3205 v2’s current configuration to your computer.

File Path 

Type in the location of the file you want to upload in this field or click 

Browse...

 to find it.

Browse... 

Click 

Browse...

 to find the file you want to upload. Remember that you must decompress 

compressed (.ZIP) files before you can upload them. 

Summary of Contents for WAP3205 v2































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands