ZyXEL Communications VSG-1200, User Manual

Page: 210 / 280

VSG-1200 User’s Guide
210 Chapter 27 LAN and WAN Setup Using the SMT
Figure 145 SMT: WAN Configuration: PPTP
The following table describes the PPTP-related fields in this menu.
WAN Configuration
WAN Type? (D/S/P/T) :T
Local IP Address :
Local Subnet Mask :
Gateway IP Address :
Server IP Address :
Username :
Password :
Connect Setting? (C/K) :C
Max idle Time(Min) :10
Optional Setting
Connection ID/Name :
PPP MTU Setting :1460
TCP MSS setting :1400
Table 71 SMT: WAN Configuration: PPTP
FIELD DESCRIPTION
WAN Type? (D/S/
P/T)
Enter T to enable PPTP support.
Local IP Address Enter the (static) IP address assigned to you by your ISP for the WAN interface.
Local Subnet
Mask
Enter the subnet mask assigned to you by your ISP (if given) for the WAN
interface.
Gateway IP
Address
Type the IP address of the gateway device (if given).
Server IP Address Enter the IP address of the PPTP server.
Username Enter the login user name assigned to you by your ISP.
Password Enter the password associated with the user name above.
Connect Setting?
(C/K)
Enter C (Connect on demand) when you don't want the connection up all the time
and specify an idle time-out in the Max. Idle Timeout Setting field. This is the
default selection.
Enter
K (Keep alive) when you want your connection up all the time and specify the
redial time in the Redial Period field to set how long the VSG waits before trying to
bring up the connection automatically if it is disconnected.
Redial Period
(Sec)
The field is only visible when you select K in the Connect Setting field.
Type the time in seconds that elapses before the VSG automatically attempts to
reconnect to the PPTP server. The default is 30 seconds.
Max Idle Time
Setting
This field is only visible when you select C in the Connect Setting field.
Type the time in minutes that elapses before the VSG automatically disconnects
from the PPTP server. The default is 10 minutes.
Optional Setting
Connection ID/
Name
If your ISP has provided a connection ID name, enter it in this field exactly as
provided.
PPP MTU Setting Enter the size of a Maximum Transmission Unit (MTU).