ZyXEL Communications VSG-1200 V2 User Manual Download Page 52

Page: 52 / 282

VSG-1200 V2 User’s Guide

Chapter 4 Initial Setup Example

The

Billing Profile Setting

screen displays. In the

Name

field, enter “Standard” for
identification.

Enter “$5/hr” in the

Description

field.

Select

hour

and enter 5 in the

Charge

field.

Enter 15 in the

field under

Selective Unit

. Leave all other

fields to the defaults.

Click

Apply

and

Close

to save

the settings.

In the

Billing Profile

screen,

you should see the name of the
profile you have just created.
Select

Active

to enable it and

click

Apply

to save the

settings.

4.4 Setting User Authentication Method

You want to configure the VSG to check user account information against the account
information stored on its database.

In the web configurator,
click

System Setting >

Authentication

Select

Built-in

Authentication

and use the

default scenario settings.

Click

Apply

to save the

settings.

Summary of Contents for VSG-1200 V2



























































































































































































































































































Search results

Summary of Contents for VSG-1200 V2

Reviews:

Brands by name

Popular brands

ZyXEL Communications VSG-1200 V2, User Manual

Search results

Summary of Contents for VSG-1200 V2

Reviews:

Brands by name

Popular brands