ZyXEL Communications VSG-1200 V2, User Manual

Page: 45 / 282

VSG-1200 V2 User’s Guide
45 Chapter 3 The Web Configurator
3.4.1 Saving Configuration Changes
In a configuration screen, you must click Apply to save the changes. A Success screen
displays when the configuration settings are saved to the VSG. Click back to return to the
previous screen.
Figure 13 Apply: Success
For specific settings (such as the device IP address, subscriber authentication method, etc.),
you will be prompted to restart the VSG after you click
Apply in the configuration screen. A
Restart screen displays. Click Apply again to restart the VSG and make the changes take
effect.
Figure 14 Apply: Restart
3.5 System Login Accounts
There are four system accounts that you can use to log in to the VSG: administrator, account
manager, supervisor and super subscriber.
• The administrator account allows you full access to all system configurations. The default
administrator user name is “admin” and password “1234”.
• The account manager account is used for subscriber account management only. No
system configuration is allowed. This account is useful for front desk personnel (such as
in a hotel) for setting up subscriber accounts without tampering with the system
configuration. The default user name and password are “account”.
• With the supervisor account, you can only view the system status and change the
supervisor account password. The default user name are “supervisor”.
• The super subscriber account is used for testing the Internet connection between the VSG
and the ISP. There is no time limitation or billing imposed on this account. Thus anyone
who logs in with this account is able to gain Internet access for free. The default super
subscriber user name and password are “super”.
3.6 Changing System Login Passwords
Note: It is recommended that you change the system login passwords.