manualshive.com logo in svg

ZyXEL Communications VSG-1200 V2, User Manual

Share
Download
ZyXEL Communications VSG-1200 V2 User Manual Download Page 227

VSG-1200 V2 User’s Guide

227

Chapter 32 Using The SMT

Note: 

Note that as you type a password, the screen displays an asterisk “*” for each 
character you type.

32.10  Restart

Follow the steps below to restart the VSG.

1

In the main menu, type 6 and press [ENTER]. A screen displays prompting you to 
confirm.

Figure 175   

SMT: Restart  

2

Type 

Y

 and press [ENTER] to restart the VSG. Otherwise, type 

N

 and press [ENTER] to 

cancel the action and return to the main menu.

32.11  SMT Logout

To log out of the SMT, enter 7 in the main menu screen. A “

Logout System (Y/N)?

” 

prompt displays. Enter 

Y

 to log out. 

Figure 176   

SMT: System Logout 

32.12  Factory Defaults

If you forgot your administrator login user name and password, you have to use the 

RESET 

button to reset the VSG back to the factory defaults. Refer to 

Chapter 2 on page 38

.

Resetting the VSG restores all system configuration back to the factory defaults. However, 
you may retain the subscriber account information. 

Note: 

All system settings will be lost once you reset to the default settings.

Press [ESC] to return to the Main Menu screen.

Follow the steps below to reset the VSG back to the factory defaults.

1

In the main menu, type 8 and press [ENTER]. A screen displays prompting you to 
confirm.

2

Type 

Y 

and press [ENTER] to reset the VSG.

                          Restart System (Y/N)?

            Logout System (Y/N)?

Summary of Contents for VSG-1200 V2



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands