manualshive.com logo in svg

ZyXEL Communications VSG-1200 V2, User Manual

Share
Download
ZyXEL Communications VSG-1200 V2 User Manual Download Page 202

VSG-1200 V2 User’s Guide

Chapter 30 Firmware

202

C

H A P T E R

30

Firmware

This chapter shows you how to upgrade firmware on the VSG using the web configurator. 

Note: 

o NOT interrupt the file upload process as this may PERMANENTLY damage 
the device.

30.1  Firmware Overview

In the web configurator you can manually upgrade the firmware on the VSG or have it done 
automatically by setting up a schedule. 

To manually upgrade the firmware, you have to down the latest firmware from 

www.zyxel.com

. With scheduled firmware upgrade, the VSG automatically checks for, 

downloads and upgrades the latest firmware every time interval specified.

The following figure shows the links in the 

Firmware

 screen. 

Figure 142   

Firmware: Links 

30.2  Manual Firmware Upgrade

Follow the steps below to upgrade the firmware manually.

1

Download the latest firmware from www.zyxel.com to your computer. Unzip the file if it 
is zipped.

2

Access the web configurator. Refer to the section on accessing the web configurator for 
instructions.

3

Click 

System Tools

, 

Firmware 

and the 

Manual Firmware Upgrade 

link to display the 

screen as shown.

Figure 143   

Firmware: Manual Upgrade 

Summary of Contents for VSG-1200 V2



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands