manualshive.com logo in svg

ZyXEL Communications VSG-1200 V2, User Manual

Share
Download
ZyXEL Communications VSG-1200 V2 User Manual Download Page 189

VSG-1200 V2 User’s Guide

189

Chapter 28 System Status

28.6  NAT Pool Table

The VSG provides a NAT address pool feature for use with VPN. It allows subscribers to 
connect to remote VPN servers that allow only one connection per source IP address.

Click 

System Status 

and 

NAT Pool Table

 to open the screen shown next. This screen displays 

the LAN and WAN IP addresses that are currently being used as well the VPN types.

Figure 126   

System Status: NAT Pool Table 

The following table describes the labels in this screen. 

28.7  LAN Device Status

The 

LAN Devices Status 

screen displays the status of LAN devices configured in the 

LAN 

Devices 

screen (refer to 

Chapter 21 on page 160

).

Idle 

This field displays the number of seconds of inactivity for a session.

Go .. page

Select a page number from the drop-down list box to display the selected page.

First

Click 

First 

to go to the first page.

Previous

Click 

Previous 

to return to the previous page.

Next

Click 

Next 

to go to the next page.

End

Click 

End 

to go to the last page.

Table 64   

System Status: Session List  (continued)

LABEL

DESCRIPTION

Table 65   

System Status: NAT Tool Table 

LABEL

DESCRIPTION

No

This field displays the index number of an entry.

Source IP Address This field displays the IP address of the subscriber device on the LAN that is using 

the VPN.

Source MAC 

Address

This field displays the MAC address of the subscriber device on the LAN that is 

using the VPN.

Translated IP 

Address

This field displays the WAN IP address of the VSG to which the LAN IP address of 

the subscriber using the VPN was translated.

VPN Type

This field displays the type of VPN connection that is being used (

IPSec

 or 

PPTP

).

Summary of Contents for VSG-1200 V2



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands